3M 5952 VHB (Very High Bond) 1.1mm black acrylic double sided migrating adhesive tape.

Prior to installing, a degrease and keying of both mating surfaces are highly recommended. This can be achieved with a solvent based degreasing solution or wipe and then a light sand ot scotch brite to break the surface of the substrates. Pressure is to be applied by hand or with a roller to active the adhesion process on the tape is in position on the assembly. The initial tack of the tape is likely to be low as it is a low tack migrating tape and will take a day or two to migrate and set. Some car polish and paints may reduce the effectiveness of the bond of the tape.

Please seek instruction form 3M on application of the tape prior to assembly.